LENTA-106 Concrete Plant
136 027 $
Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
57 334 $
- BP-2G-2250 Twin-shaft concrete mixer
- Pneumatic valve double
- Connection set for pneumatic equipment
- Броня сменная чешуйчатого типа. Толщина брони 16 мм. Материал: Чугун ЧХ16Н2
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Automatic central lubrication system
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Concrete mixer machinery certificate
13 487 $
- Belt conveyor assembly: 18 m long, 800 mm wide
- Drive: 15 kW gear motor
- Receiving hopper
- Mounting frame. 25 degrees inclination
- Leading drum with lining. ⌀ 390 mm, width 840 mm
- Driven drum. ⌀ 377 mm, width 840 mm
- Chevron belt, thickness - 8 mm
- Docking lock «Alligator» (USA)
- Grooved roller support (paint and varnish coating). ⌀ 57 mm
- Support rollers. ⌀ 57 mm
- Guide rollers. ⌀ 57 mm
- Machinery certificate
7 580 $
- Overpass E 10.00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2243 kg
- Software on your own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work in the local network
- Automatic operation by pressing "one" button
- Recipe storage database for concrete production
- Programmable Logic Controller
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protective and switching equipment "Omron", "Siemens"
- Set of diagrams and instruction manual
30 393 $
- Aggregate bins (3 x 20). Total volume 60 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 6 pcs.
- Pneumatic equipment - 6 electro-pneumatic distributors, a set of fittings and tubes, 6 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 6 pcs.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчик BSA-2 "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
11 598 $
- Mounting frame (powder coating). Weight - 200 kg
- Cement dispenser, dosage - 900 kg (powder coating):
- Three inlet pipes for augers (Two are covered with lids)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc damper ∅200
- Load cells Cas BSA500 - 3 pcs.
- Signal amplifier - weight converter - 3 pcs.
- Pneumatic distributors - 3 pcs.
- Vibrator MVE 300/3 - 1 pc.
- Water dispenser, dosage - 450 liters (powder coating):
- Load cells Cas BSA500 - 3 pcs.
- Unloading ball pneumatic damper ∅50 - 2 pcs.
- Water dump pump
- Controlled water and chemical supply system
- Chemical additives dispenser, dosage - 60 liters, made of stainless steel:
- CAS BСA100 strain sensor - 1 piece
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
5 479 $
- Auger assembly
- Pipe Diameter 273 mm, tube length of 12 000 mm
- Drive: gear motor. Power 15 kW
- Inspection window for cleaning and maintenance
- Operational documentation
- Twin-shaft concrete mixer MAO 2250
- Multi-channel uniform water spray system
- Replaceable wear-resistant Ni-Hard cast iron armor, strength 500 HB
- Pneumatic gate - two-side
- Connection set for pneumatic equipment
- Planetary concrete mixer MPC 2250
- Mixer drive - 74 kW
- Replaceable wear-resistant armor made of cast iron with a strength of 500HB
- The sector valve with rubber seal is equipped with a hydraulic drive with the possibility of manual opening
- Water treatment system with water spray nozzles
- Inspection hatches are equipped with an access security system
- Twin-shaft concrete mixer MAO 3000
- Multi-channel uniform water spray system
- Replaceable wear-resistant Ni-Hard cast iron armor, strength 500 HB
- Pneumatic gate - two-side
- Connection set for pneumatic equipment
40 216 $
- Bunkers of inert BI-80 (4 x 20) - 8 sections. The total volume is 80 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Pneumatic equipment - 8 electric pneumatic distributors, a set of fittings and tubes, 8 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE 300/3 - 8 pcs.
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- The soft starter, frequency converter
- Strain gauge - 6 pcs.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
- Lattice on the section of the bunker 70x70 for DKM-80 (DKM-60) - DKM-80.23.000-02-T
- Lattice on the bunker section 100x100 for DKM-80 (DKM-60) - DKM-80.23.000-01-T
480 $
- The pump Calpeda MXH 202E assembled for chemical supply. additives
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
1 890 $
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- One window (PVC, double glazing), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
529 $
- Aeration jet - 18 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- Filter regulator - 1 pc.
- Ball valve G1/4 - 2pcs
- Axial pressure gauge, 0-2.5 bar - 1 pc.
- 3/2 distributor G1/4, unilateral. - 1 PC
- Solenoid - 1 pc
- Solenoid connector - 1 pc
527 $
- Aeration jet - 18 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- Filter regulator - 1 pc.
- Ball valve G1/4 - 2pcs
- Axial pressure gauge, 0-2.5 bar - 1 pc.
- 3/2 distributor G1/4, unilateral. - 1 PC
- Solenoid - 1 pc
- Solenoid connector - 1 pc
488 $
- Aeration jet - 16 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- Filter regulator - 1 pc.
- Ball valve G1/4 - 2pcs
- Axial pressure gauge, 0-2.5 bar - 1 pc.
- 3/2 distributor G1/4, unilateral. - 1 PC
- Solenoid - 1 pc
- Solenoid connector - 1 pc
- Heat generator TGV-250 basic version
- Fan assembled with an electric motor type Fan VR 140-15 No. 8 version 1, 22 kW, 3000 rpm, left. 270. 380/660
- The automation system (control cabinet)
- chimney section
- Schild in the control cabinet
- Passport and Manual
21 768 $
- Silo bank (V=103m³)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
- safety valve
- Adjusting ring
- Material - Carbon Steel
- Compound - a collar
- Passport to Safety Valve
24 527 $
- Silo tank (V = 118 m3)
- Cylindrical section - 12 sectors, cover - 6 sectors
- Cone big - 6 sectors, middle cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 17 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600 ml - 14 tubes
- Machinery certificate
20 280 $
- Silo tank (V = 105 m3): cover - 4 sectors, cylindrical section - 28 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600 ml - 15 tubes
- Machinery certificate
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
CBP operation mode - fully automatic on the principle of "single button".
BP-2G-2250 Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. Concrete mixing plant is equipped with a chevron belt conveyor for lifting and loading of the aggregates into the mixer.
ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.
For storage and precise batching of the inert materials metering complex DCM-60. Delivery of bunkers of the increased volume (to 72 cubic meters) is possible. Inert are loaded and stored in bunkers, the number of bunkers is 3 x 20 cubic meters. meters, the total volume of bunkers is 60 cubic meters. meters. Under the bunkers there is a belt conveyor-dispenser, on which the exact dosing of the components takes place, the components are fed from the bunkers by opening the sliding gates, the gates are controlled by the Camozzi pneumatic system.
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
With the help of an auger, cement is fed into the BD-90 batcher unit, which consists of a cement batcher for 900 kg, water for 450 liters and a chemical additive batcher for 60 liters. Each dispenser sits on three high-precision "CAS" load cells and a rigid frame, which increases the accuracy of dosing. The cement dispenser is equipped with an MVE 300/3 vibrator to stimulate the flow of cement when it sticks.
Batched aggregates are fed into the mixer where they are being mixed. Upon achievement of the required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper.
Then the cycle is repeated.
One cycle lasts for about 50 seconds during which 0.8 cu m of ready-to-use concrete is produced. Plant's capacity is 80-106 cu m per hour of operation.
- Capacity: 106 cu m per hour
- Twin-shaft concrete mixer with belt conveyor
- Software on our own SCADA system complete with a monoblock: accounting of material consumption and equipment operation, remote access and control over the work
- Transportation in 2 euro trucks
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 80...106
- Automatic operating mode
- BP-2G-2250 Concrete mixer
- Bunkers (number x volume m3) 3 x 20
- Silo capacity (optional), tons 160...315
- Design summer
- Load of inert materials into the concrete mixer belt conveyor
- Total power, kW 82
- Sector gate, pneumatic control
- Weight, kg 20,000
- Height, mm 9,600
- Width, mm 3700
- Length, mm 29,800
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning team
available
Worldwide
delivery
in trucks or containers
Call, hotline in Uzbekistan
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: Uzbekistan, Tashkent region,
Tashkent region, TKAD, Tutzar village
e-mail: sales@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery
Response within 1 hour
You will get the offer with
individual delivery and payment conditions